The FBCU series feedback motion controllers are multi-axis network motion controllers for position feedback developed by OMTOOLS for high-precision and ultra-high-precision motion control systems. The built-in ARM chip and the embedded operating system are used to manage the controller’s communication and motion, while providing general development interfaces, so as to facilitate users to conduct the secondary development as required. The FPGA technology is applied to realize the drive control of underlying motion and the collection and processing of feedback signals. Therefore, the close-loop control of high-precision motion systems can be realized as long as users develop appropriate close-loop control software on PCs. Currently, the company’s standard products are available for the motion control of 2-axis, 4-axis, and 6-axis systems. They are compatible with popular motors such as two-phase stepping motors, Oriental Motor motors, and Panasonic Servo Motors. The product can meet the control requirement of plane and space trajectories, including linear interpolation, circular interpolation, and spiral interpolation.
|
Impulse frequency
Calculated automatically according to the motion speed and the number of pulses per revolution of the motor，but the value will not exceed 5MHz
|
|
Communication interface
Ethernet+RS232
|
|
Limit interface
Positive limit、zero limit、negative limit
|
|
Limit signal voltage
≤DC24V
|
|
Impulse bit
32
|
|
Velocity/acceleration bit
32
|
FBCU-SS series can drive 2-phase28、42stepping motor with or without encoder；
Single axis/2 axis/4 axis/6 axis control available for selection, with Gratings for secondary development；
Provide a complete software control kit, which includes an intuitive graphical control panel。
FBCU-SM seriescan drive 2-phase 57 stepping motor with or without encoder；
Single axis/2 axis/4 axis/6 axis control available for selection, with Gratings for secondary development；
Provide a complete software control kit, which includes an intuitive graphical control panel。
FBCU-SL series can drive 2 -phase86 stepping motor with or without encoder；
Single axis/2 axis/4 axis/6 axis control available for selection, with Gratings for secondary development；
Provide a complete software control kit, which includes an intuitive graphical control panel。
FBCU-A1 series can drive 100W Panasonic servoMotor，Power supply AC220V；
Single axis/2 axis/4 axis/6 axis control available for selection, with Gratings for secondary development；
Provide a complete software control kit, which includes an intuitive graphical control panel。
FBCU-A2 series can drive 200W Panasonic servoMotor，Power supply AC220V；
Single axis/2 axis/4 axis/6 axis control available for selection, with Gratings for secondary development；
Provide a complete software control kit, which includes an intuitive graphical control panel。
FBCU-A4 series can drive 400W Panasonic servoMotor，Power supply DC24V；
Single axis/2 axis/4 axis/6 axis control available for selection, with Gratings for secondary development；
Provide a complete software control kit, which includes an intuitive graphical control panel。
FBCU-FS series can drive 5 -phase 28O riental Motor，Power supplyDC24V；
Single axis/2 axis/4 axis/6 axis control available for selection, with Gratings for secondary development；
Provide a complete software control kit, which includes an intuitive graphical control panel。
FBCU-FM series can drive 5 -phase 42O riental Motor，Power supply DC24V；
Single axis/2 axis/4 axis/6 axis control available for selection, with Gratings for secondary development；
Provide a complete software control kit, which includes an intuitive graphical control panel。
FBCU-FL series can drive 5 -phase 57O riental Motor，Power supply DC24V；
Single axis/2 axis/4 axis/6 axis control available for selection, with Gratings for secondary development；
Provide a complete software control kit, which includes an intuitive graphical control panel。
Copyright ©2005 - 2023 武汉红星杨科技有限公司 鄂ICP备13009110号-4
