The OLCU series open-loop motion controllers are cost-effective multi-axis network motion controllers developed by OMTOOLS. Designed with an architecture that integrates PC, ARM, and FPGA, this series uses the embedded operating system on an ARM chip to manage the controller’s communication and motion, while providing general development interfaces. Thus, the users can conduct the system development as required. Currently, the company’s standard products are available for the motion control of 2-axis, 4-axis, and 6-axis systems. They are compatible with commonly used motors such as two-phase stepping motors, Oriental Motor motors, and Panasonic Servo Motors.The product can meet the control requirement of plane and space trajectories, including linear interpolation, circular interpolation, and spiral interpolation.
Impulse frequency Calculated automatically according to the motion speed and the number of pulses per revolution of the motor，but the value will not exceed 5MHz |
Communication interface Ethernet+RS232 |
Limit interface Positive limit、zero limit、negative limit |
Limit signal voltage DC24V |
OLCU-SS series can drive 2-phase28, 42stepping motors with or without encoders；
Single axis/2 axis/4 axis/6 axis control options available for secondary development；
Provide a complete software control kit, which includes an intuitive graphical control panel.
OLCU-SM series can drive 2-phase57 stepping motors with or without encoders；
Single axis/2 axis/4 axis/6 axis control options available for secondary development；
Provide a complete software control kit, which includes an intuitive graphical control panel。
OLCU-SL series can drive 2-phase86stepping motors with or without encoders；
Single axis/2 axis/4 axis/6 axis control options available for secondary development；
Provide a complete software control kit, which includes an intuitive graphical control panel。
The OLCU-A1 series can drive a 100W Anasonic servo motor with a power supply of AC220V；
Single axis/2 axis/4 axis/6 axis control options available for secondary development；
Provide a complete software control kit, which includes an intuitive graphical control panel。
OLCU-A2 series can drive a 200W Panasonic servoMotor，Power supply AC220V；
Single axis/2 axis/4 axis/6 axis control options available for secondary development；
Provide a complete software control kit, which includes an intuitive graphical control panel。
OLCU-A4 series can drive a 400W Panasonic servoMotor，Power supply DC24V；
Single axis/2 axis/4 axis/6 axis control is available for selection, equipped with Gratings, and can be developed for secondary use；
Provide a complete software control kit, which includes an intuitive graphical control panel。
OLCU-FS series can drive a 5-phase 28O riental Motor，Power supply DC24V；
Single axis/2 axis/4 axis/6 axis control options available for secondary development；
Provide a complete software control kit, which includes an intuitive graphical control panel。
OLCU-FM series can drive a 5-phase 42O riental Motor；
Single axis/2 axis/4 axis/6 axis control options available for secondary development，Power supply DC24V；
Provide a complete software control kit, which includes an intuitive graphical control panel。
OLCU-X-FL series can drive a 5-phase 57O riental Motor，Power supply DC24V；
Single axis/2 axis/4 axis/6 axis control options available for secondary development；
Provide a complete software control kit, which includes an intuitive graphical control panel。
Copyright ©2005 - 2023 武汉红星杨科技有限公司 鄂ICP备13009110号-4
