Material: 6061-T6 aluminium alloy

The LBB12 and LBB13 Ø25 mm post adapters are designed by OMTOOLS for 30 mm and 60 mm cage systems, respectively. Insert two paralleled Ø6 posts into the open-type mounting rack, use one M4 screw to lock them from two sides. The flexible structure allows more stable clamping. The M6 screw on the side is used to fix the entire adapter to the Ø25 mm post. In this way, one post can support the entire cage system.

Material: 6061-T6 aluminium alloy

The LBB14 Ø25 mm post adapters are designed to fix Ø25 mm and Ø12 mm posts with a 90° angle. The M6 screw on the side is used to fix the entire adapter on the Ø25 mm post. The extra wide relief groove on the inner wall with a Ø12 mm through hole deliver stable two-line contact with the Ø12 mm post while avoiding sliding and rolling of the post. The GYBSNL9 precision-machined knurled hexagon M6 thumb screws with plastic caps can be fastened by a 5 mm hexagon wrench to lock the Ø12 mm posts. Benefiting from the integral structure and good rigidity, these clamps can achieve stable and compact combination of complex accessories.

Material: 6061-T6 aluminium alloy

The LBB15 Ø25 mm post adapters are used to clamp Ø25 mm mechanical or optical elements, and the M6 screw on the side is used to lock the clamp. The adapter is connected to a 50.8 mm×50.8 mm mounting plate at the fore. A total of 25 M4 threaded holes and 24 M6 threaded holes are arranged on the mounting plate, forming a cross grid. A hole pitch of 12.5 mm are left between the same type of threaded holes. These holes are used to fix a variety of optomechanical bases and lens holders, and their usage is similar to breadboards. Adapters are supported by optical posts, and can be used as the clamps for optomechanical or optical elements.